Walker Sealants manufacture the Armour-Range of polymer modified bituminous repair systems designed by HTS Consultancy to effectively treat reflective cracking in all types of Highway and Airfield surfaces. The Armour-Range provide a multiple choice of options to repair surface damage and prevent further deterioration using materials and application techniques which have been developed and modified over 20 years to provide maximum effectiveness and practicality.

Selection of the most appropriate Armour-Range product is dependent on the surface condition and locality of the repair. Once sealed, further deterioration above or below the surface interlayers will be prevented subsequently reducing further reflective cracking. The Bridgejoint, Surface Repair and Inlaid systems can be dressed with a 3mm aggregate finish, to produce a durable, non-reflective and high SRV finish.

Depending on the requirement of the finished aggregate various colours can be chosen to blend with the adjacent surfacing.

· Armourband® - Tech data sheet
A stress absorbing overband sealing system for treating reflective cracking in asphalt and concrete pavements.

· Armourjoint® - Tech data sheet
HA approved polymer modified bridgejoint binder for asphaltic plug joints and full depth repairs.

· Armourlay® - Tech data sheet
A general purpose crack sealing system for sealing
multiple joints or cracks in asphalt and concrete surfaces.

· Armourlay Plus® - tech data sheet
A micro textured overbanding and crack sealing system with a designed SRV of 60 +.

· Armourscreed® - Tech data sheets AS50 - AS100
A stress absorbing inlaid crack repair system to provide a stable and effective treatment with improved elastomeric performance, designed for easy and rapid application.

· Armourseal® - Tech data sheet N1 - N2
A range of Hot Applied Joint Sealants manufactured to British and European Standards

Walker Sealants Tele: 01433 - 621600 Fax: 01433-621592
e-mail: sales@portawayminerals.f9.co.uk
HTS Consultancy Tele 01282 - 771260 Fax 01282 - 771260
e-mail: pliles@hts.u-net.com