ARMOURLAY OBS 45

 

USES

 

A general purpose overbanding and crack sealing system for use on concrete roads and

asphalt surfacing.  

 

DESCRIPTION

 

A hot applied polymer modified bituminous system designed to seal and overband reflective

cracking in one operation.  The product is suitable for application to all Highway and

Airfield surfaces in temperate climates.           

                

PROPERTIES

 

Minimum Application Temperature + 3°C

Product Pouring Temperature 160/170°C

Maximum Safe Heating Temperature 190°C

Penetration Value BS2499:1993 30 ± 10 dmm

Flow resistance   BS2499:1993 < 20mm

Softening Point   BS2499:1993 70 - 28°C

Flash Point COC > 250°C

 

 

CHEMICAL RESISTANCE

 

Bituminous products soften in contact with petroleum solvent and mineral oils. The product

has good resistance to dilute acids and alkalis.

                       

                                  

STORAGE                 Store in a cool dry place preferably under cover and away from direct

                                    sunlight.

 

PACKAGING            Multiply poly- silicone lined sacks - 20kgs Net.

 

 

 

 

                       

 

 

 

 

 

 

 

 

 

ARMOURLAY OBS 45

 

BRAND NAME                                    OBS 45

 

COMPOSITION

 

Rubberised bitumen - A blend of SR grade bitumen, polymer, rubber crumb, extender &

adhesion agent.                                      

 

SAFE HANDLING PRECAUTIONS

 

·        Do not exceed the maximum safe heating temperature.

 

·        Do not allow the hot material to come into contact with water as the product will

react violently.

 

·        Always wear the recommended protective clothing.

 

ACUTE HEALTH HAZARDS & ADVICE:

 

ARMOURSEAL bituminous products present no acute health hazard at ambient temperature.  However, as these materials are normally handled at elevated temperatures when their physical state changes to a liquid, the bitumens present in these products give off fumes which are undesirable to inhale as very small quantities of Hydrogen Sulphide may be present in the bitumen.

 

RECOMMENDED PROTECTIVE CLOTHING:

 

Overalls, Goggles/Visor, Gloves and Closed Safety Boots when handling hot products.

 

TRANSPORTATION                     Not classified as hazardous for transportation

 

FURTHER INFORMATION

 

Additional information on the product is given in the system Safety Data Sheet and

Installation Method Statement or by contacting the following:

 

Walker Minerals Limited                         HTS Consultancy

Outland Head Quarry                                     18 Furness Avenue

Bradwell                                                           Simonstone

Hope Valley                                                     Ribble Valley

Derbyshire S33 9JP                                          Lancashire BB12 7SU

Tel:       01433 - 621600                                  Tel:            01282 - 771260

Fax:      01433 - 621592                                  Fax:            01282 - 771260

e-mail: sales@portawayminerals.f9.co.uk        e-mail: pliles@hts.u-net.com